VAPECIGE VTX100 100W Device


7~10 Business Days Dispatch

The VAPECIGE VTX100 device is one to check out, if you’re wanting light weight, colour, compact, durable and very comfortable in the hand.

The VTX100 is manufactured with an ABS material chassis and rubber paint finish, designed mainly for portability and comfort in the hand.

Powered by a single 26650 (18650 adaptor plate included) battery with an advanced IM100 chipset, battery cycle life is outstanding when utilising a Golisi S43 Pro Series battery. Additionally, the Vapecige VTX100 device can fire up from 1W to 100W and supports Ni, Ti, SS & Bypass modes.

On the control face of the VTX 100W, you will see the familiar 0.91-inch OLED display with a horizontal menu and all the vape data you may need such as current power, resistance, wattage, a battery bar and more.


The useful features don’t stop there either, with 2A quick charging and spring-loaded 510 connection, the Vapecige VTX100 is a simple yet excellent vaping device and perfectly suited as a daily setup.

The Technical Stuff

Main Features

  • Advanced IM 100 chipset
  • Smooth rubberised painted body
  • Compact yet very powerful
  • Accepts both 26650 & 18650 batteries
  • 2A Quick charging
    • ‘Pass Thru’ charge capability, vape and charge
  • Durable ABS construction material
  • Quality colour 0.91-inch OLED screen
  • Firmware upgrades


  • Wattage Range
    • Minimum: 1W
    • Maximum: 100W
  • Operating Modes
    • Power/Wattage (VW)
    • Temperature Control
      • Nikel
      • Titantium
      • Stainless Steel
    • Bypass
  • Resistance Range
    • Power Mode (VW)
      • Minimum: 0.08ohm
      • Maximum: 2.0ohm
    • Temperature Mode (TC)
      • Minimum: 100C (200F)
      • Maximum: 315C (600F)
  • Battery Requirement:
  • Connector & Thread: Spring Loaded 510 thread
  • Dimensions
    • Height: 80mm
    • Width: 46mm
    • Depth: 32mm
  • Construction Material
    • ABS (very light but durable)
    • Rubberised Painted

What’s in the Box?

  • 1 x VTX100 100W device
  • 1 x Charge & firmware upgrade cable
  • 1 x User manual

Replacement Parts

  • None


  • 3 Months Replacement
  • DOA, advise in writing within 7 days of delivery receipt


General Battery Safety

Download "Safety of Lithium-Ion Batteries" document

Battery safety is very important. Mistreated batteries can get extremely hot and/or vent which could cause injury. Always follow the following rules to make sure this doesn't happen. We are not liable for mistreated batteries.

  • Never completely discharge batteries (below 2.5V under load or 3V unloaded)
  • Charge fully (to 4.2V) before first use
  • Never use a lot of force on the battery to install
  • Use only high quality battery chargers
  • Do not expose to heat
  • Do not connect the positive contact to the negative contact without an appropriate load
  • Be mindful of the current limits in the specification and never exceed them
  • Never keep spare battery or batteries loose in or near;
    • Pocket etc
    • Purse etc
    • Vehicle glovebox or console compartment, in fact never in a vehicle
    • Direct sunlight
    • Machinery
    • Fire or heat sources
  • If storing batteries short or long term, use these guidelines
    • Use a battery model specific protective case, found here
    • Use a cool & dry environment
    • Don not store fully charged, approximately 3.6~3.7V is best
  • Never try to charge or discharge li-ion batteries with battery chargers that are not made for Li-ion batteries
  • Never charge battery 4.3V or above
  • Do not charge unattended
  • Do not store your li-ion batteries fully charged for an extended period of time (weeks or more)

Customer Reviews

Based on 1 review Write a review

Our Brands