OBS TECH Damo Tank


OBS Tech

$38.50 
Availability: 13 in stock

 The OBS Tech Damo Tank, is a good all-round budget tank that does most things well and is at a good price point for a tank like this. But what makes this tank truly useful, practical and very low cost to maintain in the future is the following.

Firstly, a handy feature of the Damo is the eLeaf Melo 2- esque, easy top refill system, so you can simply pull up the top cap (after closing the air flow slots) and refill the liquid. Nice!
Secondly, the standard 5mL capacity provides good capacity for juice storage, but what if we told you the Smok TFV8 Big Baby Beast Fat Boy 7mL Tank Glass also fits? Plus, both Smok glasses can be sourced from almost anywhere around Australia in case you break one, or a few.
Thirdly and probably the best feature of the Damo is the ability to use these are compatible coil heads, some are better than others but there is no mistaking the huge choice of coils available for the OBS Damo tank.

 

Coil Compatibility

The Technical Stuff

  • Filling: Pull-up side fill
  • Airflow: Bottom Adjustable
  • Anti-Leak Base Design
  • Dimensions: 25*55mm
  • Capacity: 5mL
  • Construction: Stainless
  • Supplied Coil Heads
    • M6 0.2ohm 40~80W (Best @ 50~70W)
    • M2 0.4ohm 30~50W (Best @ 35~45W)
  • Thread: 510

 What's in the Box

  • 1 x Damo Tank
  • 1 x M6 0.2ohm Coil Head (pre-installed)
  • 1 x M2 0.4ohm Coil Head
  • 1 x Spare Tank Glass
  • 1 x Seal Kit
  • 1 x User Manual

Replacement Parts

Warning

  • Always 'prime' coil with e-liquid prior to use. 5 minute 'prime & sit' time recommended. Failure to do so may lead to the cotton being burnt within the coil head, this will lead to an unpleasant 'burnt' taste making the coil head unfit for use.
  • Thoroughly dismantle, clean and inspect all tank components for wear, faults or replacement of rubber O-rings and or seals. Failure to do so may cause the newly installed coil head to not work correctly and may even damage preventing further use.
  • Do not attempt to clean used coil heads with water, this will lead to the coil wire rusting and should be strongly avoided. However, if the coil head needs to be 'freshened' due to a change in e-liquid flavour then we recommend the use of isopropyl Cleaning Alcohol. Simply submerge coil head in a small cap full of isopropyl and lightly agitate and even use an old tooth brush to gentle clean away any contaminants. CAUTION: Allow the coil head to FULLY DRY in a shaded dry area before use.