LOST VAPE Thelema Quest 200W Kit


Lost Vape

$125.00 

or get it now with for $43.75 AUD + 3 payments of $27.08 AUD Learn more

THE LOST VAPE THELEMA QUEST 200W KIT  - is an alternative to the high end and well repsect Evolve DNA250 Thelema, incorporating Lost Vape's very own in-house QUEST chipset. Importantly this Quest 200W chipset has been fitted into the same high end Thelema DNA chassis with only a few very minor difference between them, but a BIG saving on price.  
MAIN FEATURES & SPECIFICATIONS
  • Thelema Quest 200W Device
    • Quest 2.0 Chipset
    • Dimensions
      • Height: 92.5mm
      • Length: 56mm
      • Width: 27.6mm
    • Dual High-Amp 18650 Batteries (not included)
    • Wattage Output
      • Minimum: 5W
      • Maximum: 200W
    • Voltage Output:
      • Minimum: 0.7
      • Maximum: 8.0V
    • Resistance
      • Minimum: 0.1ohm
      • Maximum: 5.0ohm
    • Temperature Control
      • Minimum: 200°
      • Maximum: 600°F
      • Wire Compatibility
        • Nickel
        • Titanium
        • Stainless Steel
    • Operating Modes
      • Power (Wattage)
      • Temperature Controlled
      • Voltage
      • Bypass
    • Boost Function
      • Soft
      • Normal
      • Hard
    • Construction Materials
      • Zinc-Alloy
      • Poly Carbonate
    • Intuitive Firing Button
    • 0.96" TFT Colour Display Screen
    • Two Adjustment Buttons
    • Mode Button
    • "C-Frame" Magnetic Battery Door
      • Thelema DNA250 Interchangeable
    • Safety Protections
      • Low Battery
      • Check Atomiser
      • Short-Circuit
      • Temperature Overheat
      • 10 Second Timeout (accidental firing)
    • Threaded 510 Connection
    • Type-C USB Fast Charge & Firmware Upgrade Port

  • Lost Vape UB Pro Tank
    • Durable Shockproof NO GLASS Design
      • PCTG Tank Cap
      • Stainless Steel Base
      • Silicone Fill Plug
    • Diameter
      • Base: 26mm
      • Widest: 28mm
    • Liquid Capacity: 5mL
    • Side Fill System (silicone plug)
    • UB Pro Coil Series
      • Press Fit "P 'n' P" Design (pull n push installtion)
      • UB Pro P1
        • 0.15ohm
        • Ni80
        • 70~90W
      • UB Pro P3
        • 0.3ohm
        • SS904
        • 60~70W
    • Dual Slotted Airflow Control Ring
    • Threaded 510 Connection

  • What's in the Box?
    • 1 x Thelema Quest 200W Device
    • 1 x UB Pro Pod Tank
    • 1 x P1 0.15ohm UB Pro Coil Head
    • 1 x P3 0.3ohm UB Pro Coil Head
    • 4 x O-Ring
    • 1 x Type-C Cable
    • 1 x Warranty Card
    • 1 x User Manual



        • Warranty
          • 3 Months manufacturers replacement warranty
          • DOA, notify within 7 days of purchase/delivery receipt

        General Battery Safety

        Download "Safety of Lithium-Ion Batteries" document

        Battery safety is very important. Mistreated batteries can get extremely hot and/or vent which could cause injury. Always follow the following rules to make sure this doesn't happen. We are not liable for mistreated batteries.

        • Never completely discharge batteries (below 2.5V under load or 3V unloaded)
        • Charge fully (to 4.2V) before first use
        • Never use a lot of force on the battery to install
        • Use only high quality battery chargers
        • Do not expose to heat
        • Do not connect the positive contact to the negative contact without an appropriate load
        • Be mindful of the current limits in the specification and never exceed them
        • Never keep spare battery or batteries loose in or near;
          • Pocket etc
          • Purse etc
          • Vehicle glovebox or console compartment, in fact never in a vehicle
          • Direct sunlight
          • Machinery
          • Fire or heat sources
        • If storing batteries short or long term, use these guidelines
          • Use a battery model specific protective case, found here
          • Use a cool & dry environment
          • Don not store fully charged, approximately 3.6~3.7V is best
        • Never try to charge or discharge li-ion batteries with battery chargers that are not made for Li-ion batteries
        • Never charge battery 4.3V or above
        • Do not charge unattended
        • Do not store your li-ion batteries fully charged for an extended period of time (weeks or more)