HELLVAPE Trishul V2 Semi-Mech Tube Device



HELLVAPE TRISHUL V2 SEMI-MECH 21700 TUBE DEVICE is the latest version of the Trishul series. It is a high-end hybrid Semi-Mech tube device with an all-metal body, exquisite workmanship, and a new HELLCHIP chipset. The Trishul V2 Semi-Mech device is made of high-grade brass and copper, with an ergonomic cylindrical chassis, mirror polishing process, and relief decoration. The top diameter is 26mm, the bottom 27mm, and the ends are gradually reduced to 25mm toward the middle.

    Trishul V2 Semi-Mech Mod is powered by a single 21700, 20700, or 18650 battery, 18650 battery adapter is included. It only works with the battery installed (+) Positive up. Coming with a silicon gasket, it is compatible with different batteries automatically.

      Trishul V2 Semi-Mech has a hybrid 510 connector. On a hybrid 510 connection, you just have a hole, so that the positive pin of your atomizer makes direct contact with the positive end of the battery. On the top plate, you have three battery venting holes and cutouts, inside of the tube, you can see the chip assembly located above the battery tube.

            The HELLCHIP provides safety protections and the lowest loss thanks to an integrated chipset inside the Trishul V2 Semi-Mech device and provides a perfect introduction to mechanicals with a high level of security & protection. Furthermore, Trishul V2 Semi-Mech adopts an innovative magnet attraction button, equipped with a constant contact switch at the bottom, with dual N52 NdFeB black magnets. Silver-Plated Canted coil spring, and large copper contacts, providing a stable constant contact of the battery to provide impressive conductivity, plus a simple operation can switch Trishul V2 between mechanical and semi-mechanical if preferred once the user has a full understanding on Ohms Law.


            • 3 Months manufacturers replacement warranty
            • DOA, notify within 7 days of purchase/delivery receipt

            General Battery Safety

            Download "Safety of Lithium-Ion Batteries" document

            Battery safety is very important. Mistreated batteries can get extremely hot and/or vent which could cause injury. Always follow the following rules to make sure this doesn't happen. We are not liable for mistreated batteries.

            • Never completely discharge batteries (below 2.5V under load or 3V unloaded)
            • Charge fully (to 4.2V) before first use
            • Never use a lot of force on the battery to install
            • Use only high quality battery chargers
            • Do not expose to heat
            • Do not connect the positive contact to the negative contact without an appropriate load
            • Be mindful of the current limits in the specification and never exceed them
            • Never keep spare battery or batteries loose in or near;
              • Pocket etc
              • Purse etc
              • Vehicle glovebox or console compartment, in fact never in a vehicle
              • Direct sunlight
              • Machinery
              • Fire or heat sources
            • If storing batteries short or long term, use these guidelines
              • Use a battery model specific protective case, found here
              • Use a cool & dry environment
              • Don not store fully charged, approximately 3.6~3.7V is best
            • Never try to charge or discharge li-ion batteries with battery chargers that are not made for Li-ion batteries
            • Never charge battery 4.3V or above
            • Do not charge unattended
            • Do not store your li-ion batteries fully charged for an extended period of time (weeks or more)