FREEMAX Mesh Pro Coil Head (3pk)
Compatibility
- FREEMAX Mesh Pro (Resin)
- FREEMAX Mesh Pro (Steel)
- FREEMAX Fireluke
- FREEMAX Fireluke Pro
The Technical Stuff
- Single Mesh Coil (KA1) 0.15ohm
- Mesh Coil Wire
- Single Coil
- Wire Material: Kanthal (KA1)
- Resistance: 0.15ohm
- Wattage Range: 40~70W
- Single Mesh Coil (SS316L) 0.12ohm
- Mesh Coil Wire
- Single Coil
- Wire Material: Stainless Steel (316L)
- Resistance: 0.12ohm
- Wattage Range: 40~70W
- Temperate Range: 400~550F
- Double Mesh Coil (KA1) 0.2ohm
- Mesh Coil Wire
- Double Coil
- Wire Material: Kanthal (KA1)
- Resistance: 0.2ohm
- Wattage Range: 60~90W
- Triple Mesh Coil (KA1) 0.15ohm
- Mesh Coil Wire
- Triple Coil
- Wire Material: Kanthal (KA1)
- Resistance: 0.15ohm
- Wattage Range: 80~110W
- Quad Mesh Coil (KA1) 0.15ohm
- Mesh Coil Wire
- Quad Coil
- Wire Material: Kanthal (KA1)
- Resistance: 0.15ohm
- Wattage Range: 80~120W
What's in the Box
- 3 x Replacement Coil Head
Warning
- Always 'prime' coil with e-liquid prior to use. 5 minute 'prime & sit' time recommended. Failure to do so may lead to the cotton being burnt within the coil head, this will lead to an unpleasant 'burnt' taste making the coil head unfit for use.
- Thoroughly dismantle, clean and inspect all tank components for wear, faults or replacement of rubber O-rings and or seals. Failure to do so may cause the newly installed coil head to not work correctly and may even damage preventing further use.
- Do not attempt to clean used coil heads with water, this will lead to the coil wire rusting and should be strongly avoided. However, if the coil head needs to be 'freshened' due to a change in e-liquid flavour then we recommend the use of isopropyl Cleaning Alcohol. Simply submerge coil head in a small cap full of isopropyl and lightly agitate and even use an old tooth brush to gentle clean away any contaminants. CAUTION: Allow the coil head to FULLY DRY in a shaded dry area before use.
