CIGPET Capo 126W Device


Cigpet

$70.00 
Availability: 5 in stock

THE CIGPET CAPO 126W by iJOY is perfectly suited for vapers looking for a reliable, lightweight, compact sized device, such as Tradies & FIFO's. Fitted with the UNIV chipset and powered by dual external 18650 batteries (sold separately) and variable voltage, the Capo is a safe regulated device with a realistic wattage output of 126W.

Equipped with a traditional, but durable 0.91-inch OLED display gives you all the important parameters required such as Ohm resistance, battery levels, voltage, puff counter and of course wattage output. The Cigpet Capo is mainly constructed of a PCTJ (Polycarbonates) material giving it very good heat, impact and shock resistance, and is environmentally friendly.

Additionally, the Cigpet Capo exceeds industry requirements for safety protection standards, thus assuring you of an extraordinarily safe and green vaping experience. Further to this, the Cigpet is a perfect compact sized device with a lightweight and very comforatable feel in the hand, and is extremely portable and easy to operate. Another well thought out feature is the centered 510 connector, giving a perfect balance and positioning between device and tanks up to 25mm base diameter.

The Cigpet Capo 126W device gives direct performance with instant fire speeds, this is due to the industry leading UNIV Chipset fitted.The device also has multiple inbuilt protections, it's even flame resistant!

The Cigpet Capo 126W, perfect for harsh Tradies & FIFO work environments.

 

Main Features & Specifications

  • Manufactured by iJoy
  • Compact Size, Portable
  • Lightweight PCTJ Material
  • Durable & Tough
  • Centered Tank Positioning
  • UNIV Chipset
  • Easy To Operate
  • Dimensions
    • Height: 90mm
    • Width: 52.5mm
    • Diameter: 25mm
  • Material: PCTJ (Polycarbonate)
  • Display Screen: 0.91in
    • Height: 21mm
    • Width: 11.5mm
  • Battery Requirement: 2 x 18650 (sold separately)
  • Wattage Output Range: 1~126W
  • Resistance Range: 0.05~3.0ohm
  • Output Current Range: 0~45A
  • Output Voltage Range: 0~7.5V
  • Inbuilt Safety Protections
    • PCB Overheat
    • Short Circuit
    • Low Battery
    • Battery Reverse
    • Timeout Switch
    • Low/High Resitance
  • Micro-USB Charging Port (battery charger recommended)
  • Threading Connector: 510 (centered)

What's in the Box?

  • 1 x Capo 126W Device
  • 1 x Micro-USB Charge Cable
  • 1 x User Manual
  • 1 x Warranty Card

Warranty

  • 3 Months manufacturers replacement warranty
  • DOA, notify within 7 days of purchase/delivery receipt

General Battery Safety

Download "Safety of Lithium-Ion Batteries" document

Battery safety is very important. Mistreated batteries can get extremely hot and/or vent which could cause injury. Always follow the following rules to make sure this doesn't happen. We are not liable for mistreated batteries.

  • Never completely discharge batteries (below 2.5V under load or 3V unloaded)
  • Charge fully (to 4.2V) before first use
  • Never use a lot of force on the battery to install
  • Use only high quality battery chargers
  • Do not expose to heat
  • Do not connect the positive contact to the negative contact without an appropriate load
  • Be mindful of the current limits in the specification and never exceed them
  • Never keep spare battery or batteries loose in or near;
    • Pocket etc
    • Purse etc
    • Vehicle glovebox or console compartment, in fact never in a vehicle
    • Direct sunlight
    • Machinery
    • Fire or heat sources
  • If storing batteries short or long term, use these guidelines
    • Use a battery model specific protective case, found here
    • Use a cool & dry environment
    • Don not store fully charged, approximately 3.6~3.7V is best
  • Never try to charge or discharge li-ion batteries with battery chargers that are not made for Li-ion batteries
  • Never charge battery 4.3V or above
  • Do not charge unattended
  • Do not store your li-ion batteries fully charged for an extended period of time (weeks or more)

Our Brands