Alternate Loose Leaf Vaporizer Full Kit


Vivant

$104.15 
Delivery is 7~10 days on this item, select correct shipping option @ Check-out

The Alternate is a portable, compact, vaping device with the perfect grip feeling. It uses an onboard temperature control system powered by a replaceable and chargeable Li-ion 18650 battery (not included).

Users can turn on the device with a single click of a button. Selecting the desired temperature can be achieved by using the two intuitive up/down buttons, heating will begin automatically until the desired temperature is reached. Once the indication LED light turns green, the device is ready and will hold the desired temperature steady for one minute. When the LED turns red, please wait as the device is re-heating and will be ready again soon. It also features an industry first: airflow control to customise your vaping experience.

Powerful Functions

  • Airflow adjustment: Raise or push the airflow adjuster to control the amount of air
  • Buzzer adjustment: In power-off state, long press the on/off button and up button to enter adjustment interface. Press two regulatory buttons to adjust buzzer volume from 1 to 5. You can press the on/off button to confirm. You may switch the unit to silent mode by setting the volume to 1
  • Stealth function: When the device is on, press fire button and down button simultaneously to switch between stealth on and stealth off
  • Key lock function: In power-on state, long press the two regulatory buttons for 2 seconds to switch between Lock and Unlock
  • USB port function: The USB port can be used for charging and updating firmware
  • Switch the display mode: In power-off state, long press the two regulatory buttons and the screen display will rotate 180 degrees
  • Shift between °C and °F: If you raise the temperature to 220°C and continue to press the up button, the temperature will turn to the lowest 158°F. Equally, the temperature will turn to 428°F if the temperature decreases below 70°C
  • Countdown reset: During the 60 seconds countdown period after heating, you can press the two regulatory buttons simultaneously to restart the countdown process
 

    The Technical Stuff

    • Full convection hot air system
    • High efficiency heat exchanger
    • Removable and rechargeable 18650 battery (not included)
    • Super precise temperature control
    • Automatic off feature
    • Airflow control with reverse flow protection
    • OLED display
    • Size: 32x52x108mm
    • Best temperature:
      • Minimum: 180°C/356°F
      • Maximum: 220°C/428°F)
    • Battery Discharging Current: > 30A 18650 battery (not included)

    What's in the Box?

    • 1 x Alternate
    • 1 x Stainless Steel Concentrate Pad
    • 1 x Brush
    • 1 x USB Cable
    • 1 x User Manual
    • 1 x Grinder Tool
    • 1 x Seal Ring (Top Cap)
    • 2 x Seal Ring (Airflow Director)
    • 2 x Stainless Steel Mesh (Mesh Number: 200)
    • 2 x Stainless Steel Mesh (Mesh Number: 50)

      How do I use it? 

      1. Screw off the top cap and install a 18650 battery in proper position
      2. You can charge the device with a 1A charger via Micro-USB port
      3. Grind Loose Leaf using provided tool
      4. Screw on the filling device and remove the packing tool. Push ground material into the hole with the tool
      5. Screw on the top cap and choose desired temperature by using the up/down buttons on the bottom
      6. Press the on/off button for 2 seconds until the unit beeps and the screen reads heat 
      7. The red light will turn green and the screen will read ready when the unit has reached desired temperature. The unit will beep 3 times
      8. Breath in through the mouthpiece with a slow and steady draw
      9. The unit will auto shutoff after 60 seconds of non-use. Press the on/off button 5 times rapidly to turn on it
        How do I clean it?
        1. Ensure the unit is powered off and battery is removed
        2. Remover airflow assembly. You can use a coin to unscrew the airflow director
        3. Pull the lower portion of the assembly with a small tool to expose the internal portion;
        4. Remove the airflow valve
        5. Use a solution of 1-part water 1-part isopropyl alcohol and the provided brush. Rinse and clean all pieces until all residue is removed. Allow parts to sit out and dry completely before reassembling the unit
        6. Assemble the unit and enjoy your Alternate

           

          Our Brands